General; Safety; Personnel Qualifications - Wilo DDA Mode D'emploi

en
1

General

2

Safety

2.1

Personnel qualifications

Definition of "quali-
fied electrician"
18
Installation and commissioning by qualified person-
nel only!
All safety regulations can be found in the installation
and operating instructions of the connected
switchgear/pumps and must be observed!
Personnel must:
ƒ
Be instructed about locally applicable regulations
governing accident prevention.
ƒ
Have read and understood the installation and
operating instructions.
Personnel must have the following qualifications:
ƒ
Electrical work: Electrical work must be per-
formed by a qualified electrician.
ƒ
Installation/dismantling work: The installation/
dismantling must be carried out by a qualified
technician who is trained in the use of the neces-
sary tools and fixation materials.
ƒ
The product must be operated by persons who
are instructed on how the complete system func-
tions.
A qualified electrician is a person with appropriate
technical education, knowledge and experience who
can identify and prevent electrical hazards.
WILO SE 2020-06