Breguet 5547 Mode D'emploi page 17

English
2. Setting the time (indications H24, H12, M)
Unscrew crown X by turning it downwards (
it into position X4 to set the watch at the desired time.
This position simultaneously activates the hands of dials
H24 and H12. Refer to dial H24 for morning or afternoon
indication.
Once the time is set, push crown X back into position X2,
maintain the pressure on the crown and screw it back into
position X1 by turning it upwards (
During this time-setting operation (crown X in
position X4), the seconds hand is stopped because
the movement has a stop seconds.
In this example, the reference time H24 is set to 7:25 in
the morning.
), then pull
).