Cruise Function; Setting / Cancelling Of Cruise Function - Ismart emobility iBoard one X2 Mode D'emploi

Cruise function

Setting / cancelling of cruise function

• When the accelerator level is maintained at the same speed for more than 7 seconds, "Cruise
mode" of automatic operation at the same time will be set enable the user to enjoy more
harmonious and comfortable driving at the same time of traveling long distance.
• It is possible to immediatly cancel the "Cruise mode" if the accelerator or brake level is
manipulated.
# The cruise function is recommended to be used if there is no difficulty in operating the product
or have become skilled in riding the product.
# At the time of the initial shipment of the product, the cruise function has been turned OFF.
Refer to the following to turn ON/OFF the cruise function.
1) Press the buttons A and B of the Diagram 1 for 3 seconds simultaneously.
2) When the screen is changed illustrated in the Diagram 2, press the button B 8 times to induce
conversion as illustrated in the Diagram 3.
3) Press the button D on the Diagram 3 to change 0 to 1 (setting cruise function) / 1 to 0 (cancelling
cruise function)
4) Press the button B for prolonged period of time after the change in the number to store the
setting.
# Number "1" at the bottom of screen in the Diagram 3 / Diagram 4 signifies the setting of cruise
function while the number "0" signifies that cruise function is being cancelled.
[- Following the completion of the setting, slightly lift up and fixating the rear wheel to ensure it
does not move forward prior to driving. Operate the level for about 7 seconds to confirm whether
the cruise function has been set or cancelled accurately in order to drive the product safety]
17