Electrolux EUN2244AOW Notice D'utilisation page 6

Masquer les pouces Voir aussi pour EUN2244AOW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
www.electrolux.com
Display
3.2 Switching on
Connect the mains plug to the power
socket
1. Press the ON/OFF if the display is off.
The temperature indicators show the set
default temperature.
2. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High
temperature alarm".
If "DEMO" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
3.3 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
3.4 Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature
button.
Set default temperature: -18°C for the
freezer.
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
3.5 DrinksChill mode
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
A B
F
E
To select a different set
temperature refer to
"Temperature regulation".
After a power failure the set
temperature remains stored.
A) Alarm indicator
B) Freezer EcoMode function
C D
C) FastFreeze function
D) Freezer temperature indicator
E) DrinksChill function
F) Freezer OFF mode
useful for example when a recipe requires
to cool down a mixture for a certain period
of time, or when a reminder is needed in
order not to forget the bottles placed in
the freezer for fast cooling.
1. To switch on the function press
The DrinksChill indicator appears.
The timer shows the set value (30
minutes).
2. Press the temperature colder button
The timer indicator is shown (min).
At the end of the countdown the
DrinksChill indicator flashes and an audible
alarm sounds
3. Remove any drinks contained in the
4. Press DrinksChill to switch off the
3.6 FastFreeze mode
This function stops automatically after 52
hours.
1. To switch on the function press Mode
DrinksChill .
and temperature warmer button to
change the timer set value from 1 to
90 minutes.
freezer compartment.
sound and terminate the function.
It is possible to deactivate
the function at any time
during the countdown by
pressing DrinksChill. The
DrinksChill indicator goes
off
It is possible to change
the time during the
countdown and at the
end by pressing the
temperature colder
button and the
temperature warmer
button.
until the corresponding icon appears.

Publicité

Table des Matières
loading

Table des Matières