BASETech 1668380 Mode D'emploi page 3

Operating instructions
Electronic transformer
Item no. 1668380 (Mini, 12V, 60VA)
Item no. 1668266 (12V, 60VA)
Item no. 1668264 (12V, 105VA)
Item no. 1668265 (12V, 150VA)
Item no. 1668263 (12V, 210VA)
Intended use
The product is an electronic transformer intended for the voltage/power supply of conventional
halogen illuminants or other suitable illuminants.
The electronic transformer supplied is designed to be connected to a conventional power
socket (230V~/50Hz).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Electronic transformer
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Symbol for protection class II, fortified or double insulation between the mains
supply circuit and output voltage (protective insulation).
Allows mounting of the product at or on furniture whose attributes are unknown
(especially combustibility).
110
Integrated protection for more than +110 °C in case of failure.
Symbol for an independent converter (electronic transformer, suitable for lamp-
external operation without additional safety measures or covers).
Symbol for a short-circuit proof, safety transformer.
ta 50°C The maximum admissible ambient temperature is +50 °C.
tc xx°C The admissible enclosure temperature is xx °C ("xx" denotes the temperature, e.g.
to "70 °C", see section "Technical data").
PRI ~ ~ Input; for connection to the mains voltage (230 V~/50 Hz)
SEC
Output; for connection to the illuminants
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The electronic transformer may only be installed by a qualified technician who
is familiar with the relevant regulations (e.g. VDE, German electrical wiring
regulations)!
• Improper work carried out at the mains voltage endangers not only your life but
also the life of others!
• If you do not have the expertise required for the installation, do not install it
yourself but entrust a qualified electrician.
• The design of the product complies with safety class II. The product must only be
operated via the mains voltage of the public mains supply (230 V~/50 Hz).
• Only suitable illuminants must be operated at the electronic transformer. If
necessary, consult the operating manual of the illuminant or the notes of the
manufacturer of the illuminant.
The electronic transformer is not suited for voltage/power supply of special LED
illuminants that need a ballast with constant current.
• The maximum output power of the electronic transformer must never be exceeded.
Please see section "Technical Data" or the labels on the transformers.
When connecting the illuminants observe their power input and determine the
overall power input before connecting them to the electronic transformer.
• Never connect the outputs (low voltage) with two or more electronic transformers!
This destroys all transformers and the lamps!
• The maximum connection power at the mains voltage output must not exceed
500 W otherwise the electronic transformer will be damaged (Overload of the
conducting paths on the board), loss of warranty!
• The accident prevention regulations of the association of compensation insurers
must be followed when using all electrical facilities and equipment in commercial
locations.
• You should also heed the additional safety instructions in each chapter of this
manual.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.