Refrigerator Features; Refrigerator Door Bins; Bottle/Can Rack; Refrigerator Shelves - KENMORE ELITE 106.5177 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REFRIGERATOR FEATURES

Your model may have some or all of these features. Features that can be
purchased separately as product accessories are labeled with the word
"Accessory." Not all accessories will fit all models. If you are interested in
purchasing one of the accessories, please call the toll-free number on the
back cover or in the "Accessories" section.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.

Refrigerator Door Bins

(on some models)
To Remove and Replace the Bins:
1.
Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports and
pushing it down until it stops.

Bottle/Can Rack

(on some models)
To Remove and Replace the Bottle/Can Rack:
1.
Remove the bottle/can rack by lifting it and pulling it straight out.
2. Replace the bottle/can rack by sliding it in above the desired
supports and pushing it down until it stops.

Refrigerator Shelves

(number of shelves varies by model)
Store similar foods together and adjust the shelves to fit different heights.
This reduces the time the refrigerator door is open and saves energy.
To Remove and Replace a Shelf:
1.
Pull the shelf forward to the stop. Tilt the front of the shelf up and lift it
slightly as you pull the shelf from the frame.
2. Replace the shelf by guiding it back into the slots on the frame and
pushing the shelf in past the stop.

Wine Rack

(on some models)
The wine rack can be placed on any set of refrigerator shelf supports,
either with (as shown below) or without a shelf on the same supports.
NOTE: If the wine rack is sharing a set of supports with a shelf, you must
first remove the shelf in order to remove the wine rack.

Deli Drawer

(on some models)
The deli drawer stores raisins, nuts, spreads, and other small items at
normal refrigerator temperatures.
To Remove and Replace the Deli Drawer:
1.
Remove the deli drawer by sliding it straight out to the stop. Lift the
front and slide the drawer out the rest of the way.
2. Replace the deli drawer by sliding it back past the stop.
23

Publicité

Table des Matières
loading

Table des Matières