Ice Compartment - LG LRMDS3006 Série Manuel Du Propriétaire

us_main.book.book Page 29 Friday, February 7, 2020 11:44 AM
Using the Ice and Water Dispenser
1
Press the button for the desired dispenser
mode on the dispenser control panel. The LED
lights up when the mode is selected.
2
Press the dispenser paddle
other container to dispense cubed ice, water
or crushed ice.
Using the Measured Fill
The Measured Fill function dispenses
premeasured amounts of water automatically.
1
Select the desired amount from the
Measured Fill buttons on the dispenser
control panel.
2
Press the dispenser paddle with a container.
3
To stop the measured fill, release the
dispenser paddle.
Locking the Ice and Water
Dispenser
Press and hold the Lock button for three seconds
to lock the dispenser and all the control panel
functions. Follow the same instructions to unlock.
Cleaning the Dispenser
Cleaning the Ice and Water Outlet
Wipe the water outlet
with a clean, lint free cloth as it may get dirty
easily.
with a glass or
a
NOTE
• Lint from a cloth may adhere to the outlets.
Cleaning the Dispenser Tray
Wipe the entire area with a damp cloth. The
dispenser tray may become wet easily due to
spilled ice or water.

Ice Compartment

• Keep hands and tools out of the ice
compartment door and dispenser chute. Failure
to do so may result in damage or personal
injury.
Keep the ice compartment door closed tightly. If
the ice compartment door is not closed tightly, the
cold air in the ice bin will freeze food in the
refrigerator compartment. This could also cause
the icemaker to stop producing ice.
In-Door Ice Bin
The icemaker stops producing ice when the indoor
ice bin is full. To make room for additional ice,
empty the ice bin into the extra ice bin in the
freezer compartment. During use, the ice may
stack unevenly in the bin, causing the icemaker to
misread the number of ice cubes and stop
or ice outlet
a
CAUTION
OPERATION 29
frequently
b