E-Bench KH 350 Instructions D'utilisation page 73

• The laser scanner of the CD player can ingress humidity when:
• the set-up position is quickly changed from a cold area to a warm area
• a heating unit is suddenly turned on
• the unit is set-up in a differently acclimatised room.
Malfunctions can occur if there is a build-up of condensation within the device. In this case the
device should not be used for several hours until normal playing is once again possible.
P
OWER SUPPLY
When using the device in mains supply operation it is imperative that you comply with all techni-
cal data and instructions found in the operating manual and those on the device.
• Caution! Use only the mains cable supplied with the device otherwise there is a danger of
fi re and/or electrical shocks!
• When disconnecting from the mains, be sure to grip the plug when pulling out from the
socket and never pull out by gripping the cable.
• Never handle the mains cable and/or the plug with damp or wet hands because of the danger
of electrical shocks!
• Handle electrical cables with care; do not buckle or crimp the cable. Cables should not be
laid on the fl oor in such a way it is possible to step on them. Please be especially careful with
the mains cable between the electrical socket and the device.
• Using cables and plugs which do not correspond to the stipulated voltage can result in fi re and/or
electrical shocks. If the equipment is not going to be used for a long period of time, it should be
unplugged from the mains power supply and the batteries removed. The device is still electrically
live even if it has been turned off but the plug is still in the mains supply socket.
O
PERATING ELEMENTS AND DISPLAY
1. Loudspeakers
2. CD compartment
3. OPEN/CLOSE button
STANDBY
4.
5. EQ button
6. CD button
7. TUNER button
8. AUX button
9. Phones
10. VOLUME +/— buttons
11. POWER button
12. Signal receiver for remote control
13. LCD display
14. INTRO button
15. MIX button
16. PLAY/PAUSE button
17. BAND button
18. MEMO/PROGRAM button
19. MEMO-UP/REPEAT button
20. TUNING/SKIP/SEARCH +/— buttons
21. STOP button
Remote control
1. POWER button
2. MUTE button
3. EQ button
O
PERATING INSTRUCTIONS
F
UNCTION
Opens/closes the CD compartment
Switches the appliance on/puts the appliance
on standby mode
Selects the equaliser curves
Activates the CD player
Activates the radio
Activates the aux. mode
Headphones connection
Controls the volume
Switches the system on/off
Activates the preview function
Activates the random play function
Starts playing/pauses CD
Selects AM/FM waveband
Activates the programming function
Repeats individual/all CD tracks
When used with CD player: skips to the begin
ning of the next track/to the beginning of the
track which is currently playing or forward/
reverse search; When used with the tuner:
automatic tuning
Stops playing the CD
73