To Set The Time And Date; Stopwatch - Oregon Scientific RA126 Mode D'emploi

set up mode:
Bearing Tracking
Declination
True north
CLOCK MODE

TO SET THE TIME AND DATE

1. Press MODE to navigate to Clock mode.
2. Press SET to navigate to time and date.
3. Press and hold SET to enter settings.
4. Press ST / SP / + to scroll upwards and COMPASS /
- to scroll downwards through the setting options. The
setting sequence is as follows: 12 / 24-hour time; hour;
minute; year; day-month / month-day; month; day;
temperature unit.
5. Press SET to confirm.
NOTE
return to Clock mode.

STOPWATCH

Calibration
1. Press MODE to navigate to Compass mode.
2. Press SET to navigate to Compass with stopwatch.
3. Press ST / SP / + to start and stop the stopwatch.
4. Press and hold SET to reset.
NOTE
all modes to remind you that the stopwatch is still timing.
To view Compass with temperature:
• Press MODE to navigate to Compass mode.
• Press SET to navigate to Compass with temperature.
NOTE
time. After this, the compass will go into power saving mode
and "- - -" will appear on the display.
To re-activate the compass, press COMPASS.
6
If no key is pressed for ten seconds, the display will
Unless you stop the stopwatch, "
The compass display is active for 30 seconds at a
" will blink in