Publicité
Les langues disponibles
Les langues disponibles
Remote control & Power on
RC32B
Audio input selection
Volume decrease
volume
Play/Pause
Previous track
Battery loading: Please refer to the illustration on the right side to open
the battery compartment, insert the included AA size, CR
2025 battery and close the compartment.
Note: 1. Do not place the remote control in places that are hot and humid.
2. Remove the batteries when unused for long period of time.
3. The battery (battery or batteries or battery pack) should not be
exposed to excessive heat such as direct sun, fire or similar.
Power on
Connect the power adapter to the rear panel of the speaker, and
then to the wall socket. Or insert 6 x AA batteries into the battery
compartment and close the battery cover. The system is on and
the indicator is green.
5
English
Standby/On
Volume increase
Press: answer/end the phone call
Press & hold: decline the incoming phone call
Next track
Bluetooth
①
Press
Input
②
Set you device (mobile phone, tablet device, MP3/MP4 player etc.,) to search and select "EDIFIER Bric Connect". Pair
your device with the "EDIFIER Bric Connect".
③
Play the music on the paired device and adjust the volume
to a desired level.
Press
- Vol. +
④
Press: answer/end the phone call
Press & hold: decline the incoming phone call
When answering call, press & hold this key to switch to
answering mode for your phone.
While in Bluetooth mode, press & hold this key to
disconnect Bluetooth, and the system will automatically
switch to AUX mode.
Note: 1. "Previous/Next track" are available only for devices that support AVRCP (Audio / Video Remote Control Profile).
2. When connecting to a Bluetooth device (e.g. mobile phone), please ensure the source device supports A2DP
(Advanced Audio Distribution Profile).
3. PIN code for connection is "0000" if needed.
Operational guide
LED: blue
6
English
Publicité
