Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Striking a proper arc and maintaining the gap between the electrode and
the base metal takes practice. a beginner may expect to extinguish any
number of arcs and freeze more than a few electrodes before acquiring
the necessary skill.
Knowing when the arc is just right is a matter of experience. a crisp,
cracking sound, accompanies a good arc. The sound is similar to that
made by eggs frying. To lay a weld bead, only 2 movements are required;
downward and in the direction the weld is to be laid. always watch the
weld puddle to keep the slag from flowing in front of it to prevent causing
inclusions and gas pockets.
5.
GENERAL MAINTENANCE
5.1
except for external cleaning and occasionally retightening screws, there is
no periodic maintenance recommended for your welder.
5.2
Servicing does not require opening unit, as there are no user-serviceable
parts.
6.
REPLACEMENT PARTS LIST
7.
LIMITED WARRANTY
SCHUMACHER ELECTRIC CORPORATION, 801 BUSINESS CENTER
DRIVE, MOUNT PROSPECT, IL 60056-2179, MAKES THIS LIMITED
WARRANTY TO THE ORIGINAL RETAIL PURCHASER OF THIS
PRODUCT. THIS LIMITED WARRANTY IS NOT TRANSFERABLE OR
ASSIGNABLE.
Schumacher Electric Corporation (the "Manufacturer") warrants the
welder's transformer for 5 years, the entire welder (excluding accessories
packed with the welder and the welding cables, gun or torch) for 2 years
and the welder's welding cables and welding gun or torch for 1 year from
the date of purchase at retail against defective material or workmanship
that may occur under normal use and care. If your unit is not free from
defective material or workmanship, Manufacturers obligation under
this warranty is solely to repair or replace your product, with a new or
reconditioned unit, at the option of the Manufacturer. It is the obligation
Part Number
3599000200
0699000218
2299000549
4999000103
4999000104
4999000105
*Optional on some models
Description
HANDLE
ELECTRODE HOLDER
GROUND CLAMP
*WELDING HELMET
*WELDING GLOVES
*WELDING BRUSH
14
•
•
Publicité
Table des Matières
