Deleting A Single Learning Key; Deleting All Learned Keys In A Specific Mode - Shaw ATLAS Mode D'emploi

5. Repeat steps 2 through 4 for another device
and/or key or press and hold SETUP to exit
programming.

Deleting a Single Learning Key

This process returns the key to its original
programming for the mode you select. You can also
delete learned programming by teaching a different
function to the key (see "Programming a Learned Key"
on page 13)
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. Press SETUP until the last-selected device key
blinks twice, then 9 7 6.
2. Press a device key once (i.e., AUX, DVD, AUD,
TV, or CBL).
3. Press the key containing the learned function
to be deleted twice. The remote will blink
twice.
4. Repeat steps 2 through 3 for another key or
press and hold SETUP to exit programming.

Deleting All Learned Keys in a Specific Mode

NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. Press SETUP until the last-selected device key
blinks twice, then 9 7 6.
2. Press a device key twice (i.e., AUX, DVD, AUD,
TV, or CBL) to clear all the learned keys for
that mode. The LED blinks twice.
3. Repeat step 2 for another device or press and
hold SETUP to exit programming.
VÉRIFICATION DES CODES
Si vous avez programmé votre Atlas ENP 5 Appareils de
Shaw télécommande universelle à l'aide de la procédure
de recherche d'un code (section "Comment trouver le
37