Publicité
Les langues disponibles
Les langues disponibles
Install
YOUR ROUTER
This router makes it possible to replace an ADSL connection with a high-speed 4G connection. To use
this router in mobile mode, you will need a SIM card loaded with data.
1
•
Insert a 4G micro-SIM card into the slot located at the rear of the device.
•
A click will indicate that the card was correctly inserted.
Note: if you have a nano-SIM card, use the adaptor provided.
2
•
Plug the router into a power outlet. The POWER
and WIFI indicators will light up and remain
steady.
•
Wait a few moments.
If the 4G indicator is green: you can now connect
to WiFi with the password 12345678.
However, if the indicator is red: you must enter
your card's PIN code on the router interface
(steps 3 and 4).
3
•
Connect to the router's WiFi network by selecting one of the following networks on
your device(s):
for 4G
adaptor
nano-SIM card
"Router-4G-WiFi-2.4GHz-XXXXX"
"Router-4G-WiFi-5GHz-XXXXX".
The default password is 12345678.
micro-SIM card
or
Publicité
