Faust SBM 400 Instructions De Service page 7

Anleitung Faust SBM 400 9 spr.
Operating Instructions for the Electric
Hammer Drill SBM 400
Use only sharp bits and use your machine carefully.
STARTING UP
Momentary operation (Fig. 2)
Switch on: Press ON/OFF switch 7
Switch off: Release ON/OFF switch 7
Continuous operation (Fig. 2)
Switch on: Press ON/OFF switch 7 and lock in
place with the locking button 6
Switch off: Press and release ON/OFF switch 7
Drill/Hammer drill selector switch (Fig. 3)
You can change from drilling to hammer-drilling
using the selector switch 4. To drill, push the selector
switch 4 to the „drill" symbol on the left. To hammer-
2
08.11.2001 11:42 Uhr Seite 7
drill, push switch 4 to the „hammer" symbol on the
right. The hammer drill function is for drilling in maso-
nry, concrete and stone.
TECHNICAL DATA:
Voltage:
Power rating:
Chucking range:
Speed:
Sound pressure level LPA:
Power level LWA:
Vibration - a w
Weight
Totally insulated
3
Drill
6
Hammer drill
7
GB
230 V 50 Hz
380 W
1.5 mm dia. - 10 mm
3600 rpm
88 db (A)
96.6 db (A)
10 m/s 2
1,5 kg
7