Publicité
Les langues disponibles
Les langues disponibles
11.
LED DISPLAY
12.
CD DOOR
13.
EARPHONE JACK
14.
B. SKIP BUTTON
15.
AM/FM SELECTOR
16.
F, SKIP BUTTON
17.
PROGRAM BUTTON
18.
REPEAT ONE SONG LED INDICATOR
19.
REPEAT ALL
20.
PLAYBACK PROGRAMMED SONG LED INDICATOR
21.
PLAYBACK NON-PROGRAMMED SONG LED INDICATOR
22.
CASSETTE EJECT/FAST FORWARD BUTTON
23.
CASSETTE SLOT
24.
TURNTABLE SHAFT
25.
TURNTABLE PLATTER
26.
45 RPM ADAPTOR
27.
LIFT LEVER
28.
AUTO STOP SWITCH
29.
TONE ARM
30.
33/45/78 RPM SPEED SELECTOR
31.
TONE ARM REST
32.
AIR CIRCULATION
33.
FM ANTENNA
34.
AC POWER CORD
35.
BLUETOOTH/CASSETTE FUNCTION SELECTOR BUTTON
36.
USB SOCKET FOR PC ENCODING
CAUTION:
This unit should not be adjusted or repaired by anyone except qualified service personnel.
1. Rotate the POWER/VOLUME ON/OFF SWITCH (5) to turn on the TCD-2600.
2. Rotate the FUNCTION SELECTOR (2) to select Radio mode. The dial scale LED will light up.
3. Use the AM/FM SELECTOR (15) to select the desired bands.
4. Adjust the TUNING KNOB (4) to tune in the station you want to listen to.
5. Rotate the POWER/VOLUME ON/OFF SWITCH (5) to the desired volume level.
6. When you wish to turn off the Radio, rotate the POWER/VOLUME ON/OFF SWITCH (5) to the OFF
position.
Hints for best reception:-
-
AM: The receiver has a built-in AM bar antenna. If AM reception is weak, slightly rotate or change
the position of the unit will usually improve the AM reception.
-
FM: The receiver has a build-in FM ANTENNA (33) which can be found at the back of the unit. This
wire should be totally unraveled and extended for best reception.
RADIO OPERATION
6
Publicité
