Use - DS Produkte TS-19140 Mode D'emploi

EN

Use

PLEASE NOTE!
■ To prevent overheating, do not use the warming bottle under a blanket or similar
cover. Do not place the mains cable on or beneath the warming bottle during charging.
Heating Up the Warming Bottle
1. Place the warming bottle (3) on a fl at surface.
6. Insert the mains plug into an easily accessible plug socket. The temperature control
lamp (1) lights up red and the device starts the heating process.
The heating process lasts approx. 8 – 12 minutes. The process stops automatically
and the temperature control lamp goes out when the device has been heated up to
approx. 70 °C.
7. Remove the mains plug from the plug socket.
8. Pull the plug out of the warming bottle and remove the bottle from the charging station.
9. To close the connecting socket, screw on the protective cap until it engages.
10. Hold the warming bottle at the sides and move it gently from side to side so that the
heat is distributed evenly.
Putting On the Warming Bottle
The warming bottle (3) can be fi xed using the strap (5) on different parts of the body (e. g.
shoulder, back, abdomen).
1. Use the adjuster to adjust the size of the strap.
2. Place the warming bottle on the part of the body you want.
3. Fix the strap in place using the buckle fastener.
To release the buckle fastener, press down the locking lug in the middle and press
together the buckle fastener at the sides.
16
2. Fold the strap (5) on the side of the connecting socket (6)
under the warming bottle.
3. To open the connecting socket, unscrew the protective
cap (7) until it clicks.
4. Open up the charging station (9) and place the warming
bottle in between.
5. Press the plug (8) into the connecting socket.