Télécharger Imprimer la page

Velleman VTLAMP5W Notice D'emploi page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

VTLAMP5W – LAMP WITH MAGNIFYING GLASS
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to
a specialised company for recycling. This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman
device was damaged in transit, don't install or use it and contact your dealer.
This powerful magnifying glass (3 & 10 dioptre) is ideal for precision work. It can be placed in any position thanks to
the long flexible arm (31cm). This lamp features a heavy base for maximum stability and a circular fluorescent lamp
with low power consumption.
2. Replace the Lamp
Unplug the device and let the circular fluorescent lamp cool down before replacing it.
The lamp is located behind a plastic diffuser.
1.
Gently bend the stem so that the diffuser points upwards.
2.
Remove the 5 screws holding the plastic diffuser in place. Remove the diffuser carefully and make sure not to drop
the lamp.
3.
Hold the lamp at the plastic ring and disconnect the lamp from the connector. Pull on the connector, not the
cables. Take out the defective lamp.
4.
Install a new lamp (order code LAMP5W) and insert the connector.
5.
Put the diffuser back and fasten the screws.
3. Beware
Never leave the magnifying lens unattended where direct sunlight may pass through it: this creates a fire hazard.
Use the lamp only indoors.
If the power cable is damaged, have it replaced by your dealer.
The only user-serviceable part is the lamp. Have a qualified person service the device should it become defective.
4. Technical Specifications
Dimensions
Height
Base
Lamp Holder
Ratings
Weight
Replacement Lamp
Use this device with original accessories only. Velleman Components nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info concerning this
product, please visit our website www.hqpower.com. The information in this manual is subject to change
without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman Components nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
VTLAMP5W
®
! Please read the manual thoroughly before bringing this device into service. If the
35cm
Ø 17cm
Ø 14cm
230VAC/1W
1.45kg
LAMP5W
2
VELLEMAN®

Publicité

loading