Editing The Chain - Korg BEATLAB BTL-1 Mode D'emploi

When the BEATLAB pauses, replay of the
chain starts immediately after a tempo is
specified.
Entering zero causes the indication on the
LC display to change to "PRG" and replay of
the chain to start at the tempos specified in
the individual programs.
"EDIT" appears on the LC display when the
setting is changed.

Editing the chain

<Deleting a program>
(1) When a chain is being replayed, press the
START/STOP key to stop it. No program can
be deleted while a chain is being replayed.
(2) Press the parameter selection key positioned
under "BAR."
(3) Select the bar from which you desire to de-
lete the program using the
the numeric keys.
(4) Press the DEL key.
The program is deleted from the selected bar,
causing the programs preset in the subse-
Deleting program from bar 5
BAR
PROG
BAR
PROG
<Inserting a program>
(1) When a chain is being replayed, press the
and keys or
(2) Press the parameter selection key positioned
(3) Select the bar in which you desire to insert a
quent bars to shift forward. It is unallowable
to delete all the programs and specify the
end command to bar 1.
On the LC display, the deleted program num-
ber disappears and the program number
shifted to the bar appears at once.
"EDIT" appears on the LC display when the
setting is changed.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
↓ Deleting from bar 5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 --
START/STOP key to stop it.
under "BAR."
15