Product Features - Gira 2330 02 Notice D'installation Et D'utilisation

1

Product features

• Battery-operated, combined smoke alarm device and thermal detector
(maximum and differential function) for the protection of residential
buildings, apartments or rooms with similar purpose in accordance with
DIN 14676
• Smoke detection can be disabled for rooms where the ambient
conditions are not favourable for the smoke alarm device, such as
kitchens (vapour from cooking)
• Automatic selftest of smoke evaluation with impurities indicator
• When dark, up to 12 hours delayed indication of battery replacement
display or technical fault
• Wired networking of up to 40 smoke detectors
• Loud, intermittent warning tone, minimum 85 dB (A)
• Battery replacement display
• Soiling/fault display
• Built-in button for function test
• Battery compartment interlock: if the smoke detector does not have
a battery fitted, then it is not possible to lock it into place in the mounting
plate or 230 V base.
• 1 module interface for fitting one of the optionally available modules; the
network terminals remain available for use
• Polarity reversal protection: The unit cannot be destroyed due to
incorrect battery connection
• Can be retrofitted with 230 V base for Smoke alarm device Dual/VdS
(product no. 2331 02)
25