BREATHING VALVE
Mount washing plug, 31731-51, on the breathing valve.
1.
With breathing hose attached to the breathing valve, pressurize the breathing
2.
valve and wash it manually in warm cleaning fluid (maximum 55° C) with a brush
or sponge.
Rinse the breathing valve in clean water (maximum 60° C).
3.
Depressurize and disconnect the breathing valve from the pressure source.
4.
Remove the washing plug.
5.
Dry breathing valve.
6.
Refer to "Extended cleaning and disinfection", available on www.interspiro.com/
support, for disassembling and cleaning of the breathing valve on extraordinary
occasions.
10
STORAGE AND TRANSPORT
Store in a cool, dry and dust-free environment. Protect against direct sunlight, UV
radiation and direct heat.
The First Breath version should be stored with the lever on the breathing valve in the
position for activated positive pressure, see section 3.
During transport the product must be well protected inside the original packaging
material or equivalent packaging material.
11
SERVICE AND TESTING SCHEDULE
Service and testing shall be performed according to Service and testing schedule
97307. Visit www.interspiro.com for latest revision.
10