Protect The Environment; After-Sales Service - Terraillon TPRO3100 Notice D'utilisation

NOT_TPro_3100_v2.qxd
Operation
1. Tap lightly on the center of the scale beneath the display to turn it on. The following displays will
appear in the following order :software version of the scale, all digits and symbols ,
2. Step on the scale while the display shows "0.0" and stand still while the weight is computing. Weight
reading will be shown automatically:
3. The product will turn off automatically after approximately 10 seconds.
Warning indicators
Err0
Err2
9V
bAtt
nt

PROTECT THE ENVIRONMENT

Dispose of used batteries in a designed container so that they can be collected and recycled. Do not mix
different types of batteries. Do not mix new and used batteries.
After life, dispose of this product at a designated waste recycling point.
GUARANTEE
This product is guaranteed against defects in materials or manufacturing. During the guarantee period, any
le
such defects will be repaired free of charge (proof of purchase must be shown in the case of a complaint
under guarantee). The guarantee does not cover damage resulting from improper use or negligence. In the
event of a claim, first contact the shop where you purchased the product.
AFTER SALES SERVICE
For calibration and after sales services, please contact Terraillon consumer service at the following address:
21/03/07
CLASS III ELECTRONIC MEDICAL SCALE
Initial zero error. Step off the scale, wait until
the scale shows 0.0 and repeat measure-
ment.
Overload: remove weight immediately.
Low battery indication: replace it.
After Sales Service: Terraillon France & Headquarters
4/F, Eastern Centre, 1065 King Road, HONG KONG
16:11 Page 6
adErr
EEP
Ustb
EC REP
B.P.73 -78403 Chatou Cedex-France
Service consommateurs :0 826 88 1789
serviceconsommateurs@terraillon.fr
www.terraillon.com
FOOK TIN TECHNOLOGIES LTD
s
www.fooktin.com.hk
"0.0".
Hardware problem.
Please contact place of purchase.
Hardware problem.
Please contact place of purchase.
Unstable zero. Please wait until the scale
shows 0.0 and repeat measurement.
6