Using The Tampers; Using The Drip Tray; Using The Scraper Set - Tribest GreenStar Pro GS-P502 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

b. With the Homogenizing Screen: Tighten the juicing knob all the way when
using the homogenizing screen to make sure the processed ingredients do not
get pushed out through the pulp outlet.
2. Soft Fruit Knob (optional accessory):
Use the Soft Fruit Knob the same way you would use the Juicing Knob when
juicing softer produce. The soft fruit knob has a softer spring, allowing pulp to
be ejected more easily while juicing softer produce.
3. Breadstick Knob:
With the Breadstick Screen: Use the breadstick knob with the breadstick screen
to make breadsticks, mochi, sorbets, or other foods where a smoother consistency
is desired. The breadstick knob shapes your ingredients into a tube as they are
pushed through the pulp outlet.
E. Using the Tampers
F. Using the Drip Tray
Simply slide the narrow end of the drip tray between the two feet of the Greenstar Pro and place the
juice pitcher on top of the drip tray to prevent messy drips from staining your counter.
G. Using the Scraper Set
Attach the scraper attachment to the handle and use the tool to scrape off the pulp residue on the juic-
ing screen. Remove the scraper attachment and replace it with the cleaning brush attachment to brush
away the remaining pulp residue. Watch the Scraper Set tutorial here: https://youtu.be/K35JzBtjl0c
1. Plastic Tamper: The plastic tamper is specially designed to
push your vegetables through without the tamper touching the
Twin Gears. Press firmly on the tamper to push the food down
through the feeding chute. The plastic tamper will stop before it
comes in contact with the Twin Gears.
2. Wooden Tamper: The wooden tamper is made of wood
and can be used to push your ingredients all the way down to
the Twin Gears. The wooden tamper can touch the Twin Gears
without damaging them.
EN
13

Publicité

Table des Matières
loading

Table des Matières