Before You Start - Agu SKT6 Mode D'emploi

• The smart kids toothbrush head should be replaced every
3 months or more frequently when the bristles become
worn out.
• Stop using the device if any part (brush head, handle)
is damaged. There are no user-serviceable parts in the
device. If the device is damaged, contact a service center.
8

BEFORE YOU START

Read the instruction manual carefully before using the
device, and keep it for future reference.
1 Get the device and its accessories out of the box, remove all
packing materials, promotional stickers and labels.
Your toothbrush handle is waterproof (IPX6), electrically safe and
designed specifically for use in the bathroom.
2 Connect the USB-C cable to the 5 V / 1 A power adapter
(power adapter is not included).
DC 5 V / 1 A
3 Remove the silicone plug of the charging port from the
toothbrush base.
4 Connect the main unit of the toothbrush to the charging unit.
The charging indicator blinks
brush is charging. When the main unit is fully charged, the charg-
ing indicator goes out
battery.
5 When charging is complete, disconnect the cable and
replace the silicone plug. The device is ready to use.
Make sure that the device is completely dry before recharging.
Use only replacement heads recommended by the manufacturer.
36
, while the main unit of the tooth-
. It takes up to 2 hours to fully charge the