Publicité
Les langues disponibles
Les langues disponibles
Mobil TV Instructions
Switching On the TV Using Car Plug
5.
In order to supply the power via the cigarette lighter socket of your vehicle, plug one end of the cigarette
lighter adaptor cable (car plug - can be purchased separately if not supplied with the TV) into the vehicle
socket and plug the other end of the adaptor cable into the DC 12V terminal on the backside of the TV.
Then the standby LED will light up.
6.
Press the Standby button on the remote control or press the centre of the control switch on the TV in.
The TV will then switch on.
7.
Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching Off the TV
1.
The TV cannot be switched into standby mode via the control switch. Press and hold the Standby button
on the remote control. Power off dialogue will appear on the screen. Highlight OK and press the OK button.
TV will switch into standby mode.
2.
Unplug cable connectors and power plugs.
ATTENTION: 12 V Input
AC Adaptor Specifications
Manufacturer Name
Model Identifier
Input Voltage (V)
Input AC Frequency (Hz)
Output Voltage (V)
Output Current (A)
Output Power (W)
Average Active Efficiency
Efficiency at Low Load (%10)
No-load Power Consumption (W)
V+
V+
V-
V-
MOSO POWER SUPPLY TECHNOLOGY CO., LTD
MSA-Z4000IC12.0-48W-Q S7017-Q0
100-240
50-60
12,0
4,0
48,0
% 87,8
% 79,0
0,10
English - 36 -
Publicité
