Avionaut KITE+ Manuel D'utilisation page 62

blue. Instructions for the correct installation can be
found in this manual and on the Kite+ sticker, which
is located on the side of the seat.
• Test the correct installation of the child safety seat.
If the marker on the front of the base is red, correct
the seat installation. Perform this step until a green
check mark confirms that the installation is correct.
Maintenance and hygiene
1. The upholstery of the Avionaut Kite+ child safety
seat can be machine washed at temperatures up to
30°C at speeds up to 600 rpm.
2. Other elements of the safety seat can be washed
with soap and a soft sponge.
3. Keep your child safety seat clean. Do not use any
moisturising agents or aggressive cleaning agents.
4. Do not use any lubricants, harsh chemicals or
moisturisers for moving parts or other parts of
the seat.
Environment
• Keep plastic packaging parts out of reach of the
child to avoid the risk of suffocation.
• The batteries powering the information panel
placed in the base of the child safety seat are
subject to proper disposal.
• For reasons of environmental protection,
after using the seat, please dispose of it in the
appropriate waste management facility, in
accordance with applicable local regulations.
Questions
If you have any questions, call your seller or authori-
sed distributor. Prepare the following information:
— The age, height and weight of your child,
— The make and type of the car and the position of
the seat on which you will install the Avionaut Kite+
child safety in the car.
Warranty
• The Avionaut Kite+ child safety seat is covered by a
24-month warranty.
• We hereby assure you that the product has
been manufactured in accordance with current
EU requirements regarding safety and quality
standards and that at the time of purchase the
product is free from manufacturing and material
defects.
62