Appliance Description - Beem DYNAMIC i-POWER Mode D'emploi

EN

Appliance description

(See illustration on the left fold-out page)
1 Spray nozzle
2 Tank cover
3 Steam flow regulator
4 Steam shot button
5 Spray button
6 Handle
7 Mains cable
8 Bend protection
9 Temperature display
10 Pedestal
11 Control indicator
12 Water tank
13 Temperature regulator
14 "MAX" mark
15 Self-clean button
16 Ironing sole
17 Measuring cup
18 User manual (not illustrated)
Steam flow regulator
Level Function
0 no steam
continuous adjustment of
the steam flow from 0 to the
maximum steam flow (com-
pletely right)
BEEM - Elements of Lifestyle
DYNAMIC i-POWER
Temperature regulator
The following table and the labels at-
tached to garments indicate which temper-
ature setting should be used for ironing.
Level Function
OFF appliance switched off
low temperature, suitable for
●
nylon, silk
medium temperature, suit-
●●
able for wool
high temperature, suitable
●●●
for cotton
highest temperature, suitable
MAX
for linen
Special functions of the appliance
■ The appliance is equipped with an
electronic temperature setting,
which reliably sets and maintains the
selected temperature.
■ The appliance is equipped with an
automatic safety switch-off. Both
function when the appliance is in a
horizontal or vertical position.
– When you insert the plug into the
mains socket, the appliance begins
to heat up and the control indicator
(11) lights up. When the set temper-
ature has been reached, the control
indicator (11) flashes ― the appli-
ance is on standby.
– When your grip the handle (6), the
appliance switches itself on (au-
tomatic switch-on, fig. A) and the
control indicator (11) lights up con-
tinuously.
21