Cleaning And Maintenance; Technical Specifications - Omnitronic CDP-386 Mode D'emploi

Does not read the program
Pop noise
Faderstart does not work

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Type:
Available disc:
Quantization:
Sampler frequency:
Program memory:
Pitch adjustment:
Display:
Distortion:
S/N-ratio:
Channel seperation:
Frequency range:
Analogue output:
Output level:
Digital ouput:
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 15.03.2005 ©
The player is in normal playback
mode
Mixer or amplifier connections
inapropriate
Missing Audio Out-connection
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
115/230 V AC, 50/60 Hz ~
25 W
Dual Compact Disc Player
Standard CDs 8 and 12 cm
D/A-converter: 1 Bit
44.1 kHz
Up to 20 songs
±10 %
Total playback and total remaining time
Playback time and remaining track time when playing
0.01 %
92 dB
89 dB
20 - 20,000 Hz, ±0.4 dB
unbalanced via RCA
2 Vrms, ±0.5 dB
unbalanced via RCA
482 x 88.8 x 251 mm (CD-player)
482 x 88.8 x 60 mm (control unit)
19"-dimensions
5 kg (CD-player)
1.8 kg (control unit)
Press the Play/Pause-button and
re-program
Check cable and jack quality
Connect the Audio Out-sockets
with the Line-input sockets of your
mixer
26/48 1060225E_V_1_0.DOC