Dual Channel Receiver (Mode 9 From Sw 1.10 On) - TeleAlarm LE10 Manuel D'utilisation

48 en | Operation
6.9 Dual channel receiver (mode 9 from SW
1.10 on)
Standby
–
–
–
–
When a transmitter, that is matched on a odd position (1, 3, 5,
etc.), is activated:
–
–
When a transmitter, that is matched on a even position (2, 4,
6, etc.), is activated:
–
–
Battery low indication (until the battery is exchanged)
–
F.01U.139.675 | V1.4 | 2015.08
The green LED stays permanently on.
The red LED is off.
Relay 1 is switched off.
Relay 2 is switched off.
Relay 1 switches on for 2 seconds.
The red LED turns on for 2 seconds.
Relay 2 switches on for 2 seconds.
The red LED blinks 1 second on, 1 second off, 1 second on.
The red LED flashes during 2 seconds, then flashes 1
second every 10 seconds.
User Manual
LE10 Radio Receiver
TeleAlarm