Télécharger Imprimer la page

Oase Luminis 3 Notice D'emploi page 6

Masquer les pouces Voir aussi pour Luminis 3:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
- GB -
Verbinden Sie den Stecker der Anschlussleitung am Scheinwerfer mit der Buchse am Trafo. Stecken Sie den Netz-
stecker des Trafos in die Netzsteckdose. Kontrollieren Sie die Funktion der Scheinwerfer.
Der Betrieb der LED-Leuchte an einem Dimmer ist nicht möglich. Die Lichtstärke einer LED nimmt mit zunehmender
Betriebsdauer ab.
Reinigung
Sicherheitshinweise beachten! Verwenden Sie nur Wasser und eine weiche Bürste. Beachten Sie, dass keine Feuch-
tigkeit in das Gerät gelangt.
Reparatur
Das Netzteil und der LED-Scheinwerfer sind bei Beschädigung der Leitungen oder des Gehäuses nicht reparaturfähig
und müssen deshalb ausgetauscht werden. Bei Fragen und Problemen wenden Sie sich zu Ihrer eigenen Sicherheit
an einen Elektrofachmann oder an Ihren Fachhändler.
Lagerung
Das Gerät reinigen und auf Schäden überprüfen. Für Kinder unzugänglich an einem trockenen Ort lagern.
Entsorgung
Das Gerät ist gemäß den nationalen gesetzlichen Bestimmungen zu entsorgen. Fragen Sie Ihren Fachhändler.
S
Störungen
Störung
Lampe leuchtet nicht
Leuchtleistung lässt nach
- GB -
Information about this operating manual
Please read the operating instructions and familiarise yourself with the unit prior to using it for the first time. Adhere to
the safety information for the correct and safe use of the unit.
Intended use
The use of the LED spot Luminis 3, in the following text termed unit, is exclusively intended for fountain systems and
ponds at a water temperature of between +4°C and +35°C and up to an immersion depth of 4 meters, as well as for
use out of the water . Ensure that the power pack is only operated at ambient temperatures of -10°C to 40°C.
Use other than that intended
Danger to persons can emanate from this unit if it is not used in accordance with the intended use and in the case of
misuse. If used for purposes other than that intended, our warranty and operating permit will become null and void.
CE Manufacturer's Declaration
We declare conformity in the sense of the EC directive, EMC directive (89/336/EEC) as well as the low voltage direc-
tive (73/23/EEC). The following harmonised standards apply:
EN 60598-2-7, EN 61558-1, EN 61558-2-6, EN 60825-1
Safety information
OASE has manufactured this unit to the current state of the art and the valid safety regulations. Despite of the above,
hazards for persons and assets can emanate from this unit if it is used in an improper manner or not in accordance
with its intended use, or if the safety instructions are ignored.
For safety reasons, children and young persons under 16 years of age as well as persons who cannot recog-
nise possible danger or who are not familiar with these operating instructions, are not permitted to use the
unit!
Please keep these operating instructions in a safe place! Also hand over the operating instructions when passing the
u
nit on to a new owner. Ensure that all work with this unit is only carried out in accordance with these instructions.
The combination of water and electricity can lead to danger to life and limb, if the unit is incorrectly connected or
misused.
Attention! Danger of electric shock. Ensure that the cable connection points and their surroundings are dry.
The power pack and the plug connectors of the power cables supplied are not water-tight, but only rain and splash-
proof. Do not route or fit in the water.
6
Ursache
Stromzuführung unterbrochen
Lampenglas verschmutzt
Abhilfe
Stromzuführung kontrollieren
Reinigen
Signature:

Publicité

loading