Technical Characteristics; Iv- Installation / First Use; Unpackaging The Device; Recommendations - ACteon SATELEC i-SURGE Manuel D'utilisation

d. Technical characteristics
Console / micro motor / footswitch
Manufacturer By Dental
Dimensions 170 x 100 x 170 mm
Materials PORENE AN450R
Micro motor 40000 rpm / Torque: 28.6
mN.m
Noise < 65 dBA
Input Voltage 30 VDC – 36 VDC
Input Current 3.5 A – 4 A
Power adaptor
Manufacturer POWERBOX
Model LTE 120 SR
Input Voltage 100 VAC – 240 VAC
Input Current 1.2A – 0.5A
Not suitable for use in presence of flammable anesthetics or oxygen.
Conditions of use: Temp +18°C/+40°C (+64°F/+104°F) RH < 80%. Altitude restriction: 3.000m (10.000 ft)
Shipping and Storage conditions: Temp +5°C/+65°C (+41°F/+149°F) RH < 20-95% non condensing.
IV– INSTALLATION / FIRST USE

4.1 UNPACKAGING THE DEVICE

Upon reception of the device, check for any damage caused in transit.
Contact your supplier if necessary.

4.2 RECOMMENDATIONS

Have your device connected to the power supply by a certified dental installation technician. The electrical
connection of the I-SURGE must comply with the standards applicable in your country.

4.3 INSTALLATION

Important: Do not place the I-SURGE close to or on top of another device.
Do not place the power cord and the footswitch cord in a wire cover or in a cable gland.
Fuse 1 x 4.0 AT
Protection Class II
Type B
Class MD IIa rule 9 in Annex IX 93/42/EEC
Protective index IP21
console
Protective index IP65
micro motor
Protective index IP21
footswitch
Output Voltage 30 VDC
Output Current 4A
Class I
11