Assembly; Controls; Continuous Monitoring - Dyson Pure Hot+Cool Manuel D'utilisation

Assembly

Use both hands to lift the
appliance out of the box,
taking care to hold by the
base of the appliance only.
Do not lift out by the
amplifier loop.

Controls

Remote
control
Standby
ON/OFF
Tilt control
6
Slide the buttons down on both
sides of the shrouds.
The shrouds will release with the
glass HEPA filters attached.
Standby
ON/OFF
Airflow speed
Auto mode
Oscillation
ON/OFF
Sleep timer
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the appliance.
Information
menu
Heating control
Cooling mode
Airflow
direction
Night mode
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the
top of the appliance with the
buttons facing down.
Plug in and switch on.
Continuous
monitoring
With continuous monitoring
enabled, your appliance will
gather air quality, temperature
and humidity information, which is
displayed on the LCD screen and in
the Dyson Link app.
By default, continuous monitoring
is disabled. Once enabled,
continuous monitoring is
always active.
To enable/disable

continuous monitoring:

Press and hold the auto mode
button on the remote for 5 seconds
to enable it. The LCD screen
will indicate when continuous
monitoring is enabled or disabled.