Fixing The Supports; Rointe System Information & Instructions; Touchpad - Rointe OLYMPIA Guide D'installation Et D'instructions

3.2. Fixing the supports

Inside the packaging you will find a fixing kit. Please find the instructions below:
1. Choose the right part of
the wall.
2. Place the mounting stencil
on the wall, marking the places
for the holes.
4. Rointe system Information & Instructions

4.1. Touchpad

Settings
/ Back
3. Remove the stencil and
make the holes in the wall.
4. Fix the supports using the
plugs and screws provided,
or others suitable for the wall
type.
Decrease
ON/OFF /
Temperature
/ Move down
Increase
Temperature
Confirm
/ Move up
5. Check the correct position-
ing of the lower support.
6. Align the product with the
top supports.
7. Place the product in the
supports.
Manual mode/
Automatic mode
5