Troubleshooting; Noise Development; Specifications; Disposal - BOMANN FW 447 CB Mode D'emploi

Troubleshooting

Malfunction Possible cause
The device The device is
does not not supplied with
function. power.
The device is
defective.
The function switch
(7) is set to "II".
The device is Meat residue is
blocked. sticking to the
spiral.

Noise development

The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.

Specifications

Model: ........................................................................FW 447 CB
Power supply: ...........................................220-240 V~, 50/60 Hz
Nominal power consumption: ........................................... 550 W
Max. power consumption: ............................................... 1200 W
Sound pressure level: ................................................... 82 dB(A)
Protection class: ......................................................................... ΙI
Net weight (without accessories): ...................... approx. 3.32 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and is
manufactured according to the latest safety regulations.
Remedy
Check the outlet with a
different device.
Insert the power plug
correctly.
Meaning of the "Wheelie Bin" Symbol
Check the mains fuse.
Take care of our environment, do not dispose of electrical ap-
Contact our Service or a
plicances via the household waste.
specialist.
Dispose of obsolete or defective electrical appliances via
Set the function switch
municipal collection points.
to "I".
1. Set the switch (6) to
Please help to avoid potential environmental and health
"O" and wait until the
impacts through improper waste disposal.
motor has stopped.
You contribute to recycling and other forms of utilization of old
2. Set the function
electric and electronic appliances.
switch (7) to "II".
Your municipality provides you with information about collecting
3. Set the switch (6)
points.
to "R" to loosen
the blocked meat
residue.
4. Switch the device off
and pull the power
plug.
5. Now remove any
sticking residue.

Disposal

37