Power Supply - Philips PicoPix PPX5110 Manuel Utilisateur

Power supply

Use only a power adapter which is certified for
this product (see Technical data, page 19).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This device complies with
the voltage type specified on the device.
The capacity of the battery diminishes with
time. If the device functions only with the power
supply, the battery is defective. Contact an
authorised service centre to replace the battery.
CAUTION!
Always use the
projector.
Turn off the device and unplug from the power
outlet before cleaning the surface (see Clean-
ing, page 15). Use a soft, lint-free cloth. Never
use liquid, gaseous or easily flammable cleans-
ers (sprays, abrasives, polishes, alcohol). Do not
allow any moisture to reach the interior of the
device.
DANGER!
Risk of eye irritation!
This device is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens dur-
ing operation. This could cause eye irri-
tation or damage.
General safety information
B button to turn off the
5