Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
TURNING ON THE DEVICE
1) Slide the switch and select the desired temperature level in order
to turn on the device.
2) Set the desired temperature level from the 3 optional levels
available, by sliding the switch.
TURNING OFF THE DEVICE
In this mode, the device is turned off manually or automatically
after operating continuously for 3 hours. Slide the swtich to the "0"
position in order to turn off the electric blanket.
OTHER REMARKS
Try to avoid excessive exposure to heat from high temperatures
Let the blanket cool down prior to folding it for storage and do not
place objects on top of it.
TROUBLESHOOTING GUIDE:
Possible operational problems
PROBLEM
After it is turned on, the control
screen is correctly configured
with the temperature level 1, but
the blanket does not heat up or
only heats up a little.
The blanket has stopped
operating.
12
RECOMMENDATION
If the blanket heat cannot be
felt, cover with a blanket to
retain heat.
Increase the temperature level.
Check that the control is
properly connected to the
blanket AND IS PLUGGED IN.
The automatic switch-off may
be activated.
Turn the control off and
on again. If the problem
continues, contact an
authorised technical support
service centre.
Publicité
