Hazet 9033-5 Mode D'emploi page 14

4. Storage
The tool has be stored according to
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggres-
sive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: -10°C up to +40°C
• Relative air humidity: max. 60%
5. Dangers emanating
from the tool
Before each use, check the HAZET tool for full
functional efficiency. Do not use the tool if its
functional efficiency cannot be ensured or if
damage is detected. If the tool is used, when
it is not in full working order, you risk severe
injuries to persons and damage to property.
Defective tools may cause severe injury.
• Do not use tools whose on/off­switch is
defective. Tools that cannot be switched on
or off with their on/off switch are dangerous
and have to be repaired.
• Any service or repair work must be carried
out by qualified personnel only. In order
to guarantee long term operational safety,
only original spare parts of the manufacturer
must be used.
• Do not remove any safety devices and/or
housing parts.
• Do not operate the tool, if safety covers or
safety devices are missing or defective.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from warranty and liability.
Always wear personal protective clothing and safety equipment!
14
b
For Your Safety
• Wear work gloves and
eye protection. Pneumatic
tools can raise chips, dust
and other abraded particles
at high speed what may
result in severe eye injuries.
Compressed air is danger-
ous. The air flow may cause
harm to sensitive parts of
the body like eyes, ears,
etc. Dust and objects being
raised by the air flow may
cause injuries.
• use ear protection. Long
exhibition to the working
noise of pneumatic tools may
result in a permanent hearing
loss.
• Wear face or dust mask.
Breathing in the steam of
some materials like adhe-
sives and tar that contain
dangerous chemicals can
cause serious harms to the
lungs and respiratory tracts.
• Wear proper-fitting pro-
tective clothing. Tools with
moving parts can get caught
in the hair, clothing, jewel-
lery or other loose objects
what may result in severe
injuries. Never wear too large clothing and/
or clothing with bands or loops which may
get caught in the moving parts of the tool.
During the work, take off jewellery, watches,
identification tags, bracelets, necklaces etc.
that could get caught in the tool. Never
touch the moving parts of a tool. Long hair
should be covered or tied together.
• Keep children away from pneumatic tools.
Unattended tools or tools that are connected
to the compressed air supply may be used
by non­authorized persons and could injure
them or other persons.