Publicité
Troubleshooting
1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message
says "The page cannot be displayed." How can I get into the TEW-658BRM's web
configuration page?
1. Check your hardware settings again by following the instructions in section 2.
2. Make sure the Power, LAN and Wireless lights are lit.
3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the
steps below).
4. If you are still having issues reset the TEW-658BRM. To reset the TEW-658BRM, take a
pin or paperclip and press the reset button on the back of the Wireless Modem for 15
seconds. Then let go.
Windows 7
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Change
Adapter Settings and then right-click the Local Area
Connection icon and then click Properties.
Windows Vista
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Manage
Network Connections and then right-click the Local
Area Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on
Obtain an IP address automatically.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Obtain
an IP address automatically.
13
Publicité
