Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31

OPeratIOn

status indicators
Before use
Warning!
Before using this device be sure to read the operating manual for the
battery and the vehicle and understand all safety notices.
• use safety goggles and acid-proof safety gloves.
• ensure adequate ventilation.
• ensure the battery poles are clean. If the battery has removable vent
caps, fill each battery cell with distilled water to the level recommen-
ded by the battery manufacturer. Do not overfill the cells.
connecting the charger
1. attach the red (+) clamp to the (+) battery terminal.
2. attach the black (-) clamp to the (-) battery terminal.
26
GB Instructions for use
start indicator (standby) after correctly con-
necting a battery. Displays the current battery
voltage.
Displays the charging process in the respective
mode (the blocks inside the battery symbol will
flash according to the charging status). Displays
the current battery voltage and the charging
mode selected.
Battery fully charged. (all blocks inside the bat-
tery symbol are full). Displays the current battery
voltage and the charging mode selected.
error indicator when selecting an incorrect char-
ging mode, incorrect connection, short circuit
(defective battery) or overheating.
DP 3800 battery charger

Publicité

Table des Matières
loading

Table des Matières