Yamaha YVC-330 Manuel De L'utilisateur page 23

YVC-330 User's Manual
■ Pairing
Pairing is an operation where a smartphone and the product are registered with each other. When a
Bluetooth connection is used for the first time or when pairing information is deleted, the pairing
process is required.
Once a pairing is completed, you can make a Bluetooth connection in a simple procedure.
Tips
• Check that the pairing is completed on the smartphone. If the pairing is not succeeded, retry it.
• If the power supply to the product is stopped during a pairing operation, the pairing information may be
discarded. In this case, retry pairing.
• The product can be paired with up to eight smartphones. If a ninth smartphone is paired, the product deletes
the pairing information on the device with the oldest Bluetooth connection date and time.
• If the product is connected to another smartphone via Bluetooth, disconnect it from the smartphone before
pairing.
Bluetooth
indicator
Bluetooth button
22
1 Press and hold the Bluetooth button
( ) for at least 2 seconds.
The Bluetooth indicator now flashes blue at
high speed, indicating that the product is
ready for paring.
2 Perform a pairing operation on the
smartphone.
If a message prompts you to enter your
passkey, enter "0000" in figures.
Tip
If you press the Bluetooth button (
Bluetooth indicator is flashing blue at high speed,
or if 90 seconds elapses without the pairing being
completed, the product is no longer ready for the
pairing.
) while the