emerio CME-121523.1 Mode D'emploi page 6

CME-121523.1
PARTS DESCRIPTION
1. Lid of reservoir
2. Tray
3. Control Panel (see below)
4. Reservoir with water level indication
5. Jug
6. Brewing chamber
7. Filter basket
8. Reusable mesh filter
9. Lid of jug
10. Anti drip function
CONTROL PANEL
OPERATION
Before first-time use:

Before using this device for the first time please carefully rinse all detachable components with warm
water.

Fill the reservoir with cold water to the maximum water level indication.

Afterwards brew water twice without coffee powder.
To percolate coffee:
1. Fill the reservoir with cold water.
2. Open the lid of the reservoir and fill it to the desired water level indication. The maximum capacity is 1.5L
(approximate 12 cups).
3. Place the reusable mesh filter into the filter basket and place the filter basket into the brewing chamber.
Use the measuring spoon to add the amount of coffee powder appropriate to the amount of cups you want
to brew. Close the lid of the reservoir.
4. Now place the jug on the tray of the appliance.
5. Plug the power cord into an appropriate outlet. The LED display will show the default time " 12:00 ".
6. By pressing the button " MODE " once or more times, you can set the desired aroma intensity:
 
coffee . If you don't set this, the appliance works in the default setting with only one
... . The more shown on the screen, the higher aroma intensity you will get in the
- 5 -
EN

shown on the