Decotech RL998 Mode D'emploi page 9

Your alarm clock operates on DC
1. Insert one end of the micro USB cable into the micro USB port of the alarm
clock. Connect the other end to the DC 5V power adapter (included).
2. Plug the power adapter to a power outlet.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the unit from the mains socket and plug it back in.
Backup batteries
Your alarm clock can also operate with 2 x AAA/LR03 1.5V
(not included), which will save and retain all your settings in the event of a power
outage.
To install the batteries:
1. Open the battery compartment by pressing and sliding down the cover.
2. Install 2 x AAA/LR03 1.5V batteries observing the polarity markings inside the
battery compartment.
3. Close the battery compartment by replacing the cover.
Note: When the device operates on batteries, all functions are available except
lighting features. The time display will also turn off after a few seconds to save
energy. Press any button to switch it on.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product
before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types
of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as
recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to
be removed from the product. The supply terminals are not to be short-circuited. Do not throw batteries into a
fire. Remove the batteries if you are not going to use the product for a long period of time. Batteries shall not be
exposed to excessive heat such as sunshine, fire or the like.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic
discharge. Should any abnormal function occur, remove the batteries and insert them again.
RL998IM1178_V07_325.indd 9
SET UP
5V power.
9
ENGLISH
batteries
24/4/18 5:45 pm