Hercules AHW 2500 Mode D'emploi D'origine page 4

Anleitung_AHW_2500_SPK7:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Items supplied
Pallet lifting truck
Lever arm
Three fastening screws M8x25
2. Intended use
The equipment is designed for transporting goods on
pallets with an open base or with stringer boards
extending beyond the load wheels. The equipment
must be used on a firm, flat surface.
It is prohibited to use the equipment to pick up or
transport people.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
3. Assembly
1. Fasten the lever arm to the lifting truck with the
three screws M8 x 25mm (Fig. 1)
2. Undo the setting screw on the hydraulic lever
(Fig. 2)
3. Hook the actuating cable on the mount of the
hydraulic lever (Fig. 3)
4. Move the hydraulic lever to the position "Lift" and
set the setting screw so that the pallet lifting truck
lifts when the lever arm is actuated. (Fig. 4)
4
16.07.2009 9:50 Uhr Seite 4
4. Operation (Fig. 5)
1. Operating lever up = Lower
2. Operating lever in center position = Move
3. Operating lever down = Lift
4. Important! Do not park in inclines
Note: The equipment can be optionally equipped with
a foot-activated parking brake. If required, please
contact your customer service team.
Operating the foot-activated parking brake:
Push the brake to the right as far as the stop (Lock) -
the wheels will be blocked.
Push the brake to the left (Move) and the wheels will
be released again.
5. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info