Ecom Instruments DCX 00 Notice D'utilisation page 15

6.2 Description
. Charging element for battery module
2. Charging element for mobile phone
3. Jack for mains adapter
4. LED for battery module status
5. LED for desktop charger status
6.3 Initial operation
Insert the connecting cable for the mains adapter into the
jack (3) on the desktop charger ().
Connect the mains adapter to the power supply using the adapter
plug required for your region. Completely unscrew the safety screw
in the centre of the adapter using the supplied screwdriver.
Then press the appropriate adapter onto the mains adapter with the
plug side towards the cable and secure the screw back into the
adapter (only screw in lightly to prevent over-tightening it).
When doing this press the appropriate adapter onto the mains
adapter with the plug side towards the cable.
To remove the adapter the securing screw located in the middle ()
of the adapter must be completely unscrewed. Then depress the
grey button on the top side and remove the adapter (2).
()
(2)
3