Honda Power Products EU1oi Manuel De L'utilisateur page 49

3.Change the engine oil (see page 40).
4.Remove the spark plug and pour about a tablespoon of clean engine
oil into the cylinder. Crank the engine several revolutions to distribute
the oil, then reinstall the spark plug.
5.Reinstall the spark plug cap and spark plug maintenance cover
securely.
6.Reinstall the maintenance cover, and tighten the maintenance cover
screw securely.
7.Slowly pull the starter grip until resistance is felt. At this point, the
piston is coming up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position will
help to protect it from internal corrosion.
STARTER GRIP
46