Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The purpose of the maintenance and adjustment schedule is to keep
the generator in the best operating condition.
Inspect or service as scheduled in the table below.
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.
• Burns from hot parts. Let the engine and exhaust system cool before
touching.
• Injury from moving parts. Do not run the engine unless instructed to
do so.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before maintenance.
CAUTION:
Use Honda Genuine parts or their equivalent. The use of replacement
parts which are not of equivalent quality may damage the generator.
Maintenance Schedule
REGULAR SERVICE PERIOD (1)
Perform at every indicated
month or operating hour
interval, whichever comes first.
Item
Engine oil
Air cleaner
Spark plug
Valve clearance
Combustion
chamber
Fuel tank & filter
Fuel tube
NOTE:
(1) For commercial use, log hours of operation to determine proper maintenance
intervals.
(2)Service more frequently when used in dusty areas.
(3) These items should be serviced by your servicing dealer, unless you have the proper
tools and are mechanically proficient. Refer to the Honda shop manual for service
procedures.
Each
use
Check level
o
Change
Check
o
Clean
Check-adjust
Replace
Check-adjust
Clean
Clean
Check

8. MAINTENANCE

First
Every
month
3 months
or
or
10 hrs.
50 hrs.
o
o (2)
After every 300 hrs. (3)
Every year (3)
Every 2 years (Replace if necessary) (3)
Every
Every
6 months
2 years
or
or
100 hrs.
300 hrs.
o
o
o
o (3)
Page
16
40
20
41
42
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eu10i

Table des Matières