Kemper CleanAirTower Notice D'utilisation page 71

Pos. Designation
1 Device button with power light
2 Signal light
3 Service button
4 "Differential pressure" measuring
connection
5 Service socket
6 "Differential pressure" measuring
connection
7 Signal horn
8 External connections
• I/ 0 switch (Pos. 1)
Use this switch to turn the product on or off.
The green illuminated ring around the button indicates trouble-free operation.
The green light will turn off if there is a malfunction or fault and the product
switches off automatically.
• Signal lamp (Pos. 2)
The yellow signal lamp indicates a fault or an error in the product.
These faults are displayed in different flashing codes for visual indication.
The signal lamp flashes evenly at regular intervals:
– A device maintenance is due, inform the manufacturer's service department.
The signal lamp flashes briefly twice in a row at regular intervals:
– The frequency converter has a fault, inform the manufacturer's service
department.
The signal lamp flashes briefly four times in a row at regular intervals:
– Compressed air error, check required compressed air supply.
• Service switch (Pos. 3)
Only to be used by the manufacturer's service department.
• "IFA, flow" metering connection (Pos. 4)
Only to be used by the manufacturer's service department.
1502828-01
Note
I/0 switch
Only for service employees
Only for service employees
Only for service employees
Only for service employees
Optional
Tab. 21: Operating controls
- 71 -
EN