Item Checklist - Canon GP-E2 Mode D'emploi

Item Checklist

GP-E2
Connecting cables
Approx.
25 cm / 9.8 in.
Storage and Carrying Cases
Before using the storage case, insert the receiver in the carrying case to
prevent scratches. The storage case also accommodates the
connecting cables.
Connecting Cables
Use the 25 cm / 9.8 in. or 1.5 m / 4.9 ft. connecting cable if your
camera displays [GPS device settings] in the menu.
Use the 25 cm / 9.8 in. cable to connect the receiver to the EOS 7D
or other camera that does not support communication through the
hot shoe. Also use this cable when attaching the receiver to the
optional Accessory Bracket AB-E1 (p.32).
Use the 1.5 m / 4.9 ft. cable when connecting the receiver to your
camera while it is in the provided carrying case.
With certain cameras, you cannot use the connection cable. For details,
refer to the camera's instruction manual or Canon Web site.
For cameras that do not support the communication through the hot
shoe other than the EOS 7D, refer to the camera's instruction manual or
Canon Web site for details.
6
Storage case
Approx.
1.5 m / 4.9 ft.
Preliminary Notes
(Read before use)
Carrying case
Regulation
leaflet