ENGLISH
10
Problem
Steam does not
come out
immediately when I
press the steam
trigger.
4239_000_9295_3_DFU_Booklet_Simple_v2.indd 10
Possible cause
You use the ECO mode.
Water is converted into
steam in the soleplate.
When you press the steam
trigger, it will take 1 to
2 seconds until steam is
generated and released.
This is normal.
Solution
For more steam, switch off the ECO mode
by pressing the ECO button. The green
ECO light goes off.
Keep the steam trigger pressed
continuously when you move the iron over
the fabric.
12/08/14 09:36