NextBase Cinema Pro Guide De Démarrage Rapide page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Installing Cinema Pro in Vehicle
This device is specifically designed to be mounted behind the driver and/or
passenger seat(s).
1 Remove the headrest(s) and carefully route the
cable(s).
For Uno Cinema Pro
Route the T-cable into the hole of the pole on
the seat.
For Duo Cinema Pro
Route the T-cable 2 and T-cable 3 into the holes
of the poles on each side of the seat. Then from
the bottom of the seat, connect both ends of
the T-cable 2 and T-cable 3 to the T-cable 1
connectors.
2 Replace the headrest(s) into place.
3 Remove the screws to release both locking
latches on the stanchion mount.
4 Position the bracket on the bars of the headrest.
Fasten the screws on both locking latches to fix
the bracket firmly on the bars.

Publicité

Table des Matières
loading

Table des Matières