Schmidlin SILENT Mode D'emploi page 30

04 English
System description
Operation of the Schmidlin whirl systems has deliberately been kept very
easy. The functions are operated by a round button on the inside of
the bathtub. Each fitted option has its own round button.
Operation of the whirl system
The status display (LED – light-emitting diode) for the function key «SILENT»
flashes for 0.5 seconds every 8 seconds when the controller is connected to
the mains (= mains voltage present). All of the functions can now be used. The
LED in a function's symbol comes on when this function is active. The status
display flashes after all of the functions have finished (mains voltage present).
Note
The SILENT whirl system is switched off automatically after 20 minutes.
The automatic cut-out is a safety function against accidental operation of
the whirl system.
30
SILENT whirl system
Very quiet air system.
Meets the higher requirements of the standard SIA 181
«Soundproofing in building construction».
Press once Whirlsystem auf Dauerbetrieb schalten
Press twice switches the whirl system to interval
operation (2-second rhythm)
Press 3 times switches off the whirl system